Why a giclée map print wrinkles—and how to prevent it
Giclée prints are prized for their rich color and detail, but the paper can crease if it’s handled roughly or stored poorly. The Cryptmaster Map Poster from The Yetee is a giclée print designed by K Duffles, and like any fine-art print, it benefits from careful handling. Wrinkles often come from rolling too tightly, stacking without support, or hanging with uneven tension. The good news: a few simple habits will keep your map flat and ready to display.
Before you unbox, clear a workspace larger than the print. Wash and dry your hands, or wear cotton gloves, to avoid oils and smudges. Work on a clean, flat surface covered with a soft, lint-free cloth or clean paper. Avoid direct sunlight and drafts, which can make the paper curl as you work.
Unroll and flatten a shipped map print
If your print arrives rolled, follow these steps to relax the paper without forcing it.
- Unroll gently on a clean surface: Remove the print from its tube and lay it face-up on your prepared workspace. Let it relax for a few minutes before handling further.
- Place a clean, flat weight on the corners: Use clean books or smooth, flat objects (wrapped in paper if needed) to hold the corners down. Avoid heavy weights that could dent the paper.
- Give it time: Let the print sit flat under light weight for several hours or overnight. Most rolled prints will relax naturally; do not rush by bending or flexing the paper.
- Check for stubborn curl: If the print still curls, place it between two clean, rigid boards (like foam core or mat board) and add gentle weight on top. Leave it for another day. Never iron or apply heat directly to a giclée print.
Frame and hang without creasing the paper
Framing is the best way to display a map print while keeping it flat and protected. Choose a frame with a rigid backing board and a mat or spacers so the print doesn’t touch the glass. When inserting the print, handle it by the edges and avoid bowing it. If you’re using a ready-made frame, make sure the backing is clean and dry before closing it up.
For hanging, use two hooks or nails spaced apart and a level to keep the frame straight. Avoid hanging in direct sunlight, near heat sources, or in damp areas like bathrooms—these can cause the paper to warp over time. If you prefer a frameless display, use poster hangers with a rigid bar and keep the print away from humidity.
Store extra prints flat and protected
If you’re not framing your print right away, store it flat. Place it between two sheets of acid-free tissue or clean paper, then sandwich it between rigid boards. Keep it in a dry, cool place away from sunlight. Avoid rolling for long-term storage, as prolonged rolling can make the paper harder to flatten later. If you must roll, roll loosely with the print facing outward and use a wide tube.
Check stored prints periodically for any signs of curling or moisture. A flat file or a large portfolio works well for multiple prints.
What the Cryptmaster Map Poster listing confirms
- Cryptmaster Map Poster: Designed by K Duffles. Knowing the artist helps you appreciate the print’s origin, but it doesn’t change handling—treat it like any fine giclée.

Cryptmaster Map Poster - Cryptmaster Map Poster: Printed and shipped with care from Yetee HQ in Aurora, Illinois. This tells you the print is produced and packed by The Yetee, so you can expect careful packaging—but always inspect upon arrival and flatten as needed.
What the listing doesn’t tell you (and what to do)
The supplied product information does not specify paper weight, finish, or whether the print is rolled or shipped flat. It also doesn’t include care instructions beyond the shipping note. Without that detail, follow the general best practices above: handle by the edges, keep the print flat, and avoid heat and moisture. If you’re unsure about framing materials, consult a professional framer who can recommend acid-free, archival options for your print.


